Gears, transmission shafts, epicyclic trains, mechanical reducers: Cordm, calculation and manufacture of gears
Production Française Made in France

What is the difference between a spur gear and a helical gear ?

In industrial mechanical transmission systems, the choice between a spur gear and a helical gear directly affects equipment performance and reliability. Noise, load capacity, rotational stability and the forces generated all have practical implications. In its FAQ dedicated to industrial gears, CORDM provides a clear, technical explanation to help you understand the differences between spur and helical gears and choose the right gear for your production constraints. 

The difference between a spur gear and a helical gear lies primarily in the tooth geometry. This geometry determines how the teeth mesh, how the load is transmitted and what mechanical stresses are generated in your system. 

Spur gear: definition, straight teeth and operating principle 

A spur gear, also known as a straight-tooth gear, has teeth parallel to the axis of rotation. During meshing, contact between the tooth flanks occurs simultaneously across the entire face width. This design is particularly valued for its mechanical simplicity and ease of manufacture. For industrial companies, the benefit is clear: a spur gear offers excellent mechanical efficiency and generates virtually no axial force. The transmitted forces remain mainly radial and tangential, which simplifies the sizing of shafts and bearings.

However, this type of gear becomes noisier as rotational speed increases. The impacts caused by the abrupt engagement of the teeth lead to more vibration, which can be a limiting factor in high-speed equipment.

Helical gear: definition, helix angle and progressive engagement 

A helical gear is distinguished by its teeth, which are inclined at a helix angle. This geometry changes the contact kinematics. Meshing is no longer abrupt but progressive: contact starts on one part of the tooth and gradually extends across the flank. For industrial companies, this progressive meshing offers a major advantage: the transmission runs more smoothly, more steadily and much more quietly. This is why helical gears are widely used in gear reducers, high-speed systems and applications that require highly uniform motion.

This tooth design also improves the contact ratio. Several teeth can be in mesh at the same time, which distributes the load and improves wear resistance.

Spur gear vs helical gear: what are the implications for industrial power transmission? 

The fundamental difference between a spur gear and a helical gear lies in the tooth geometry. However, your choice should be guided primarily by the mechanical implications.

Load distribution, the ability to transmit high torque, noise generation and the loads applied to bearings are all directly linked to this difference in design.

Spur gear vs helical gear: torque capacity, permissible load and service life 

In a spur gear, the load is concentrated on a limited number of teeth in mesh. Contact pressure on the flanks can therefore be higher for the same torque. The permissible load depends heavily on the module, face width, material and heat treatment applied. Thanks to its higher contact ratio, a helical gear distributes forces across several teeth at the same time. This distribution reduces the stress on each tooth and improves the fatigue resistance of the tooth flanks. For comparable overall dimensions, it is generally possible to transmit higher torque while keeping wear under control.

For industrial companies, this difference directly affects the service life of the mechanical transmission. In high-power or continuous-duty applications, helical teeth often perform better over time. Conversely, for moderate loads, a correctly sized straight-tooth gear remains a reliable, high-performing solution. The choice should always be based on precise transmission calculations that take actual operating conditions into account.

Helical gear vs spur gear: axial thrust and bearing loads 

Another difference between a spur gear and a helical gear concerns the forces generated in the transmission. A spur gear produces virtually no axial force. The forces remain essentially radial and tangential, which simplifies mechanical design. A helical gear, on the other hand, generates an axial force component due to its helix angle. This axial thrust must be accommodated by suitable bearings and taken into account from the sizing stage. It affects the design of the shaft, the bearing supports and the overall balance of the transmission.

For industrial companies, this difference is fundamental. It affects not only the teeth but the entire drivetrain.

Which gear should you choose for your industrial mechanical transmission? 

The choice between a spur gear and a helical gear depends on your application, the rotational speed, the torque to be transmitted, the acceptable noise level and your mechanical layout. A spur gear is often the right choice for simple, moderate-speed applications where efficiency and ease of integration are priorities. A helical gear is generally preferred when the transmission operates at high speed or under heavy load, or when reducing noise and vibration is a key requirement.

At CORDM, we support industrial companies with custom gear manufacturing, precision gear cutting, gear calculations, gear repair and transmission shaft balancing. Our expertise enables us to steer each project towards the solution best suited to its technical constraints and performance objectives.

Understanding the difference between a spur gear and a helical gear means, above all, safeguarding the reliability and longevity of your industrial transmission system.

You can also find out about the different types of gears in our FAQ.

Our CORDM team is
available for you
Contact us and we will get back to you